home *** CD-ROM | disk | FTP | other *** search
- Path: news.delphi.com!usenet
- From: jdow@BIX.com (Joanne Dow)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Is SCSI P2P Network...?
- Date: 30 Jan 1996 10:07:06 GMT
- Organization: Delphi Internet Services Corporation
- Message-ID: <4ekqka$p74@news2.delphi.com>
- References: <4e2rup$5lg@ci.ist.utl.pt> <4ehuur$9te@news2.delphi.com> <4ei3e5$168@nnrp1.news.primenet.com>
- Reply-To: jdow@BIX.com (Joanne Dow)
- NNTP-Posting-Host: bix.com
- X-Newsreader: NetBix 1.249
- X-Newsreader-Author: lwilton@BIX.com (Loren Wilton)
- This message has been posted with development version software.
- If there are any problems with the message format, send me mail.
-
- In article <4ei3e5$168@nnrp1.news.primenet.com>,
- pdtaylor@primenet.com (Daniel L. Taylor) wrote:
- .. SCSI PtoP network vis a vis controller discussion...
- >
- >Does anyone know if there's any RFC for such an animal?
-
- Whuffo RFC? The concept is addressed by the SCSI-II specification as a
- "communications device." So if you built a serial port emulator for that
- SCSI Target you'd have to build you could run standard tools like Holger's
- PPP implementation. But seriously - good luck redesigning the A2091 or A3000
- scsi.device. Making both target and initiator work on the same controller will
- cost you no little amount of time.
-
- (For intellectual curiosity alone I'd like to see such a hack performed. Someone
- who turned such a tool that was debug tools clean and lockup clean would
- certainly earn more than just my admiration.)
-
- >Dan
- >
- >--
- >-------------------------------------------------------------------------------
- >pdtaylor __ __ ____ ___ ___ ____
- >pdtaylor@primenet.com /__)/__) / / / / /_ /\ / /_ /
- > / / \ / / / / /__ / \/ /___ /-------------------------------------------------------------------------------
-
- {^_^} Joanne Dow, Amiga Exchange Editor on BIX, aka The Wizardess
- jdow@bix.com, jdow@delphi.com, jdow@mci.newscorp.com
-
-